Based on GTX-Ell, GTX-E12A is matched with GTX-E12B together and can prevent the leakage of tannic acid from the wood, and prevent solid color of solid wood furniture from yellowing.
[Product Overview]
Based on GTX-Ell, GTX-E12A is matched with GTX-E12B together and can prevent the leakage of tannic acid from the wood, and prevent solid color of solid wood furniture from yellowing.
[Scope of application]
sealing coating for white wooden door and high-grade customized furniture.
[Product Features]
1.Quick drying.
2.Good sealing.
3.Anti-swelling and Anti- leaking of tannic acid.
4.Suitable for color paint coating system.
[Implementation Standards]
Q/HS013-2019
[Packaging and Storage]
20kgs/barrel(A:B=15:5).
Store indoors at room temperature,shelf life: months.
[Application technique]
Surface treatment: the surface of the substrate must be clean, dry, dust-free, oil-free, impurities-free, and polished flat.
Application methods: roll coating,through leveling machine and baking dry for 15-20 seconds.
Dilution ratio (weight ratio): E12A:E12B:Water = 100:33:0-10(water dosage will vary according to different application environment and application methods.)
Application viscosity: roll coating 130"to 160" (coating 4 cups/25 ℃).
Matching system: need to be matched with our company’s primer.
[Note]
Water-based products cannot be mixed with oil-based products,otherwise, it will be insoluble.
Use and mix immediately, stir well and stand for about 15 minutes to eliminate bubbles generated during stirring.
Application indoor temperature: 5℃-40℃.
Keep the application environment clean and avoid mixing of oil, dust and impurities during application.
Coating should not be too thick,in case of slow drying, cracking and other defects. The recommended roll coating dosage is 25-45g/㎡.
If the surface is flat and no need to be polished when roll coating.
If the water paint is not be used up at one time, in case of affecting the quality and application effect of water paint due to volatilization or inhalation of impurities, it must be sealed immediately.
Mixed A/B component paint must be used out in 24 hours.
[Technical Indicators]
|
Item |
Solid content,% |
Fineness,μm |
PH value |
|
Parameters |
32±2 |
≤60 |
8.5±1 |
