It is made of high-performance polyurethane dispersion coating with special synthetic process. Low application odor,good transparency,polished easily,specially used for repairing the scar and nail hole of the wood.
[Product Overview]
It is made of high-performance polyurethane dispersion coating with special synthetic process. Low application odor,good transparency,polished easily,specially used for repairing the scar and nail hole of the wood.
[Scope of application]
medium layer coating for wood furniture.
[Product Features]
Good transparency.
Easy to sand.
[Implementation Standards]
Q/HS013-2019
[Packaging and Storage]
20kgs/barrel,50kgs/barrel
Store indoors at room temperature,shelf life: 6 months.
[ApplicationTechnique]
Surface treatment: the surface of the substrate must be clean, dry, dust-free, oil-free, impurities-free, and polished flat.
Application methods: scraping coating.
Matching system: need to be matched with our company’s primer.
Drying: air dry naturally or baking dry at low temperature.
[Note]
Water-based products cannot be mixed with oil-based products, otherwise, it will be insoluble.
Application temperature: 5℃-40℃.
Application environment:if the air pressure is lower than 1 atmosphere, please test before Application.
Keep the Application environment clean and avoid mixing of oil, dust and impurities during Application.
Coating should not be too thick,in case of slow drying, cracking and other defects. The recommended spraying dosage is 80 - 100g/㎡.
When spraying, the underlying coating film should be dry fully and then can be polished with 320 mesh sandpaper after cooling down to the room temperature.
If the water paint is not be used up at one time, in case of affecting the quality and application effect of water paint due to volatilization or inhalation of impurities, it must be sealed immediately.
[Technical Indicators]
Item |
Appearance |
Fineness,μm |
PH value |
Parameters |
Paste |
≤60 |
8.5±1 |