GTX-E34 is made of high-performance polymer dispersion. Low application odor,good transparency, strong adhesion,polished easily, can effectively protect household woodwork and provide excellent decoration effect.
[Product Overview]
GTX-E34 is made of high-performance polymer dispersion. Low application odor,good transparency, strong adhesion,polished easily, can effectively protect household woodwork and provide excellent decoration effect.
[Scope of application]
medium layer coating for wood furniture.
[Implementation Standards]
Q/HS013-2019
[Packaging and Storage]
20kgs/barrel,50kgs/barrel.
Store indoors at room temperature,shelf life: 6 months.
[Application Technique]
Surface treatment: the surface of the substrate must be clean, dry, dust-free, oil-free, impurities-free, and polished flat.
Application methods: roll coating,through leveling machine and baking dry for 15-20 seconds.
Dilution ratio (weight ratio): GTX-E34:Water = 100:10-20(water dosage will vary according to different application environment and application methods.)
Application viscosity: roll coating 130"to 160" (coating 4 cups/25 ℃).
Matching system: need to be matched with our company’s topcoat.
[Note]
Water-based products cannot be mixed with oil-based products. Otherwise, it will be insoluble.
Use and mix immediately, stir well and let stand for about 15 minutes to eliminate bubbles generated during stirring.
Application indoor temperature: 5℃-40℃.
Application environment: if the air pressure is lower than 1 atmosphere, please test before Application.
Keep the Application environment clean and avoid mixing oil, dust and impurities during Application.
Coating should not be too thick to dry, cracking and other disadvantages. The recommended roller coating dosage is 25-45g/㎡.
If the surface is flat, no need to be polished when roller coating.
If the water paint is not be used up at one time, in case of affecting the quality and application effect of water paint due to volatilization or inhalation of impurities, it must be sealed immediately.
[Product Features]
1.Strong adhesion.
2.Good transparency.
3.Easy to sand.
[Technical Indicators]
Item |
Solid content,% |
Fineness,μm |
PH value |
Parameters |
40±2 |
≤60 |
8.5±1 |